黄土高原不同地貌类型区农田土壤有机碳采样布点方法研究

采样设计是土壤有机碳研究中面临的首要问题。论文对黄土高原不同地貌类型区农田土壤有机碳进行抽样样本代表性评价,对比分析了不同采样方法的样点布设效率,结果表明：1）高塬区合理采样布点方法应为网格布点法,采样点布设格网间隔4 km,网格布点法较随机布点法和联合单元布点法效率分别提高64.3%和31.8%;2）平原区合理采样布点方法应为网格布点法,采样点布设格网间隔2 km,网格布点较随机布点和联合单元布点效率分别提高64.8%和128.8%;3）丘陵区合理采样布点方法应为联合单元布点法,样点布设密度为1个/1 314 hm²,联合单元布点较随机布点和网格布点效率分别提高205.8%和294.2%。     

基于空间适宜性评价和人口承载力的贵溪市中心城区城市开发边界的划定

城市开发边界的划定能够合理引导城市空间的有序发展,控制其无序蔓延。论文以典型的资源型城市贵溪市为研究区,从空间适宜性评价、人口承载力、城市规模以及城市总体规划和土地利用总体规划（简称“两规”）衔接等方面探索有效的城市开发边界划定方法。空间适宜性评价综合考虑自然、空间可达性和生态条件,运用聚类分析法确定区域内不宜作为开发建设的生态底线区域和适宜建设开发区域的高低等级,以此确定城市开发边界的发展方向。通过灰色预测GM(1,1)模型预测研究区2020年人口总量,并基于土地资源和水资源承载力验证当地所能容纳的最大人口总量,同时确定城市规模和划定城市开发边界。以空间适宜性评价、人口承载力、城市规模预测、两规衔接和空间形态控制等方法倒逼缩减建设用地,从而划定城市发展的刚性和弹性增长边界。     

土地利用方式下土壤有机碳特征及影响因素——以后寨河喀斯特小流域为例

为研究喀斯特小流域土壤有机碳空间分布与土地利用之间的关系,基于网格法在后寨河流域挖掘了2 755个土壤剖面,并采集了22 057个土壤样品。分析了后寨河流域不同土地利用方式下土壤有机碳密度特征。结果表明：后寨河流域土壤有机碳密度主要受人为干扰、土壤厚度与岩石裸露率的制约。不同利用方式土壤有机碳密度（0~100 cm）总体上呈现以下规律：水田>旱地>经果林地>园地>草地>弃耕地>坡耕地>乔灌木林地>乔木林地>荒地>灌木林地>灌草地。后寨河流域100 cm土壤有机碳平均碳密度为8.70 kg/m²,低于中国土壤有机碳平均密度10.83 kg/m²,总有机碳储量为5.39×10⁸ kg。科学合理地进行土地利用方式调整与管理,可以增大喀斯特小流域土壤有机碳储量。     

海州湾表层沉积物磷的吸附容量及潜在释放风险

利用磷吸附指数（PSI）、磷吸附饱和度（DPS）和磷释放风险指数（ERI）研究了2016年10月和2017年5月海州湾表层沉积物的磷吸附容量及潜在释放风险.结果显示,2016年秋季PSI变化范围为99.58~199.39[mgP/（100g）]/[μmol/L],DPS变化范围为23.118%~34.289%;2017年夏季PSI变化范围是130.29~198.57[mgP/（100g）]/[μmol/L],DPS变化范围为25.545%~42.135%,两次调查中PSI和DPS均表现出相反的平面分布趋势.PSI和Al_ox、Fe_ox呈显著正相关,说明Fe_ox和Al_ox是影响海州湾表层沉积物吸附磷的主要因素,且Fe_ox占主导作用;DPS与Al_ox和Fe_ox分别表现出了显著负相关性和极显著负相关性,说明Al_ox和Fe_ox含量的增大会降低表层沉积物的磷吸附饱和度.2016年10月磷释放风险指数（ERI）的变化范围为11.59%~34.18%,2017年5月磷释放风险指数（ERI）的变化范围为12.86%~32.34%,从2次调查结果整体来看,海州湾表层沉积物的磷释放风险为中度风险.     

近10年中国三大经济区太阳总辐射特征及其与O3、PM2.5的关系

采用中国地面气象观测站网2007~2016年的辐射日值数据集和中国空气质量在线监测平台2014~2016年逐日观测数据,分析了京津冀、长三角和珠三角近10a太阳总辐射年际和季节变化,近3a臭氧日最大8h平均（O_{3_8h_max}）和细颗粒物（PM_2.5）的污染过程频次变化,通过不同因子及其不同强度等级的分型统计,探讨PM_2.5、O_{3_8h_max}与太阳总辐射的关系.结果表明：京津冀近10a太阳总辐射显著上升,京津冀春季和珠三角夏季太阳总辐射显著上升.三大经济区PM_2.5污染过程年频次均呈现逐年递减,且从北到南递减;O₃污染过程年频次时间上呈现先减后增,空间上京津冀多于长三角和珠三角.三大经济区O_{3_8h_max}与太阳总辐射相关系数均在0.71以上,有较强的正相关;而PM_2.5与太阳总辐射的相关性具有区域差异性.三大经济区不同季节不同太阳总辐射下O_{3_8h_max}与PM_2.5的相关关系差异显著,其中京津冀春夏秋三季O_{3_8h_max}与PM_2.5在强太阳总辐射下有较好的正相关,冬季则存在一定的负相关;长三角四季两者相关性均较弱;珠三角夏季两者正相关最为显著;不同PM_2.5浓度下O_{3_8h_max}与太阳总辐射的线性拟合效果较好,体现出较强的正相关关系,各经济区拟合曲线的倾向率均随PM_2.5升高而增大.PM_2.5>75μg/m³时拟合优度均达到最大.     

Potential of secondary aerosol formation from Chinese gasoline engine exhaust

Light-duty gasoline vehicles have drawn public attention in China due to their significant primary emissions of particulate matter and volatile organic compounds(VOCs). However,little information on secondary aerosol formation from exhaust for Chinese vehicles and fuel conditions is available. In this study, chamber experiments were conducted to quantify the potential of secondary aerosol formation from the exhaust of a port fuel injection gasoline engine. The engine and fuel used are common in the Chinese market, and the fuel satisfies the China V gasoline fuel standard. Substantial secondary aerosol formation was observed during a 4–5 hr simulation, which was estimated to represent more than 10 days of equivalent atmospheric photo-oxidation in Beijing. As a consequence, the extreme case secondary organic aerosol(SOA) production was 426 ± 85 mg/kg-fuel, with high levels of precursors and OH exposure. The low hygroscopicity of the aerosols formed inside the chamber suggests that SOA was the dominant chemical composition. Fourteen percent of SOA measured in the chamber experiments could be explained through the oxidation of speciated single-ring aromatics. Unspeciated precursors, such as intermediate-volatility organic compounds and semi-volatile organic compounds, might be significant for SOA formation from gasoline VOCs. We concluded that reductions of emissions of aerosol precursor gases from vehicles are essential to mediate pollution in China.     

Nanoencapsulation of hexavalent chromium with nanoscale zero-valent iron: High resolution chemical mapping of the passivation layer

Solid phase reactions of Cr(Ⅵ) with Fe(0) were investigated with spherical-aberration-corrected scanning transmission electron microscopy(Cs-STEM) integrated with X-ray energy-dispersive spectroscopy(XEDS). Near-atomic resolution elemental mappings of Cr(Ⅵ)–Fe(0) reactions were acquired. Experimental results show that rate and extent of Cr(Ⅵ) encapsulation are strongly dependent on the initial concentration of Cr(Ⅵ) in solution. Low Cr loading in nZⅥ(1.0 wt%) promotes the electrochemical oxidation and continuous corrosion of n ZⅥ while high Cr loading(1.0 wt%) can quickly shut down the Cr uptake. With the progress of iron oxidation and dissolution, elements of Cr and O counter-diffuse into the nanoparticles and accumulate in the core region at low levels of Cr(Ⅵ)(e.g., 10 mg/L). Whereas the reacted n ZⅥ is quickly coated with a newly-formed layer of 2–4 nm in the presence of concentrated Cr(Ⅵ)(e.g., 100 mg/L). The passivation structure is stable over a wide range of pH unless pH is low enough to dissolve the passivation layer. X-ray photoelectron spectroscopy(XPS) depth profiling reconfirms that the composition of the newly-formed surface layer consists of Fe(Ⅲ)–Cr(Ⅲ)(oxy)hydroxides with Cr(Ⅵ) adsorbed on the outside surface. The insoluble and insulating Fe(Ⅲ)–Cr(Ⅲ)(oxy)hydroxide layer can completely cover the n ZⅥ surface above the critical Cr loading and shield the electron transfer. Thus, the fast passivation of nZⅥ in high Cr(Ⅵ) solution is detrimental to the performance of nZⅥ for Cr(Ⅵ) treatment and remediation.     

Seasonal variation and size distribution of biogenic secondary organic aerosols at urban and continental background sites of China

Size-resolved biogenic secondary organic aerosols(BSOA) derived from isoprene and monoterpene photooxidation in Qinghai Lake, Tibetan Plateau(a continental background site) and five cities of China were measured using gas chromatography/mass spectrometry(GC/MS). Concentrations of the determined BSOA are higher in the cities than in the background and are also higher in summer than in winter. Moreover, strong positive correlations(R2= 0.44–0.90) between BSOA and sulfate were found at the six sites,suggesting that anthropogenic pollution(i.e., sulfate) could enhance SOA formation,because sulfate provides a surface favorable for acid-catalyzed formation of BSOA. Size distribution measurements showed that most of the determined SOA tracers are enriched in the fine mode( 3.3 μm) except for cis-pinic and cis-pinonic acids, both presented a comparable mass in the fine and coarse( 3.3 μm) modes, respectively. Mass ratio of oxidation products derived from isoprene to those from monoterpene in the five urban regions during summer are much less than those in Qinghai Lake region. In addition, in the five urban regions relative abundances of monoterpene oxidation products to SOA are much higher than those of isoprene. Such phenomena suggest that BSOA derived from monoterpenes are more abundant than those from isoprene in Chinese urban areas.     

基于SOM-SVM组合分类器的涂层防护性能研究

目的为避免EIS,EN技术可能出现的问题,建立一个准确、高效的评价模型,以探究现役军用有机涂层防护性能。方法利用电化学阻抗谱(EIS)、电化学噪声(EN)技术分析了两种军车有机涂层在循环暴露试验中的腐蚀行为,提取低频阻抗模值|Z|_(0.1 Hz)与涂层噪声电阻R_n两种电化学评价参数作为自组织神经网络(SOM)的输入训练样本,同时结合支持向量机(SVM)方法建立涂层防护性能组合分类器。结果将涂层失效过程自适应地分为涂层防护性能良好、防护性能下降、基本失效三个阶段。结论所建立的SOM-SVM组合分类器对于辅助分析涂层防护性能具有可行性。     

可靠性强化试验技术在某型伺服作动器研制中的适用性探索

目的探索可靠性强化试验技术在典型机电液一体化产品伺服作动器研制过程中的适用性。方法以某型伺服作动器为研究对象,从故障激发的角度对可靠性强化试验技术的应用进行可行性分析,在响应调查和应力分析的基础上,结合产品的工作特点设计适用于该类伺服作动器的可靠性强化试验方案,包含低温步进应力试验、高温步进应力试验、快速温度循环试验10个循环、振动步进应力试验(包含气锤式三轴向六自由度超高斯随机振动方式及电磁振动台随机振动方式)及综合环境应力试验5个循环,并依此进行试验。结果在快速温度循环试验及综合环境应力试验过程中,均有效地激发出了产品的漏油故障,与相似产品外场暴露的漏油故障模式相吻合。结论可靠性强化试验技术可有效地应用于典型机电液一体化产品伺服作动器的研制过程,设计的可靠性强化试验方案可有效地激发外场出现频率较高的故障,可作为该类产品研制的试验手段之一。